The Technical Data column of the previous issue discussed the concept of thermal diffusivity. It makes sense to discuss in this issue a related topic: thermal effusivity. While thermal diffusivity, a, is defined as the ratio between the thermal conductivity, k, and the volumetric thermal capacity, ρcp, the effusivity, e, is related to their product, as follows: It is … [Read more...]
Reliability Testing Of Thermal Greases
Introduction Thermal Interface Materials (TIMs) play a key role in the thermal management of electronic systems by providing a path of low thermal resistance between the heat generating devices and the heat spreader/sink. Typical TIM solutions include adhesives, greases, gels, phase change materials, pads, and solder alloys. Most TIMs consist of a polymer matrix, such as an … [Read more...]
Providing More Value Than Playing Video Games
ElectronicsCooling magazine was founded more than 12 years ago with a mission of providing current and practical thermal management information with archival value. I hope you agree this magazine is still delivering on its original promise. The last word in the mission statement is value, and each of us, as a thermal engineer, desires to add value to our projects. Admittedly, … [Read more...]
Electronics Cooling At Higher Pressures … a Positive Displacement Pump Solution
Introduction Many liquid cooling solutions in use today employ cooling system devices that result in system pressure drops limited to <0.5 bar (7.25 psi), which allows these systems to fit within the limits of centrifugal pumps. The evolution of alternative cooling devices has brought about pressure drop requirements >1.0 bar (14.50 psi) in some cases [1]. These higher … [Read more...]
Advanced Cooling Using Meso-Scale Evaporative Cold Plates
Introduction Thermal management of servers and communications equipment has become significantly more challenging over the past several years. As is well known, processor powers have increased to 150 W or more and are projected to continue to rise, despite the move to multi-core designs (and the huge investment in software that this entails) [1]. Rack-level functional density … [Read more...]
- « Previous Page
- 1
- …
- 424
- 425
- 426
- 427
- 428
- …
- 482
- Next Page »
