Editors tend to frown on use of "revolutionary" in technical papers. However, advances in thermal management material properties in the last few years clearly warrant this word. There are now over a dozen materials with low coefficients of thermal expansion (CTEs) and thermal conductivities higher than that of copper (400 W/m K), and a score with thermal conductivities at least … [Read more...]
Solve Thermal Issues Earlier in Updated Board Designs
Introduction Often new products or product concepts only introduce some new aspects and rely heavily on existing designs. At the board level this often means only one section of a board is retooled or upgraded; an approach that can save significant time and money. Unfortunately, we cannot rely solely on previous work because the interaction of old functions and new features … [Read more...]
Server Design Challenges for the High-heat-load Internet Data Center
Introduction Microprocessor and system thermal management are linked to facility cooling: power dissipation and cooling techniques employed at one end of the size scale have cascading impacts at the other extreme (Figure 1). For example, ineffective airflow distribution or insufficient underfloor static pressure in a data center can reduce the supply airflow rate from … [Read more...]
Low Profile Heat Sink Cooling Technologies for Next Generation CPU Thermal Designs
Introduction The electronic industry requires increased forced-air cooling limits to cool high-end server CPUs adequately. Improving air-cooled heat sink thermal performance is one of the critical areas for increasing the overall air-cooling limit. One of the challenging aspects for improving heat sink performance is the effective utilization of relatively large air-cooled fin … [Read more...]
Estimating Temperatures in an Air-cooled Closed Box Electronics Enclosure
Introduction In the majority of air-cooling applications, openings or vents are provided in the enclosure or box in which the electronic components are housed. The required cooling air is drawn in from outside the box by fans or blowers. In some applications, however, there may be airborne particulates or other substances in the air that would be injurious to the electrical … [Read more...]
- « Previous Page
- 1
- …
- 436
- 437
- 438
- 439
- 440
- …
- 481
- Next Page »
