By: Parizad Shojaee Nasirabadi, Jesper H. Hattel INTRODUCTION Condensation and moisture related problems are the cause of failures in many cases and consequently serious concerns for reliability in electronics industry. Therefore, it is important to control the moisture content and the relative humidity (RH) inside electronics enclosures. Understanding the transport … [Read more...]
Epoxy Certified for UL 1203 Standard
UL 1203 certified epoxy for Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous Locations Underwriters Laboratories (UL) 1203 is defined as the “Standard for Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations”. To certify an epoxy for the UL1203, sample castings are exposed to saturated vapors … [Read more...]
Cooling Trends for Industrial Drives & Power Management Applications
Introduction This article is a use of helpful comparison of common thermal solutions you may want to consider with the overall increase in automation in the electrification of the world. We'll focus on two distinct segments within the industrial market, one being energy management and the other being automation and control applications such as solar and wind inverters. … [Read more...]
Bringing LEDs & Light Pipes to Life
Introduction Whether you are in the conceptual early stage of design, making, late design stage adjustments, or doing a complete redesign of your product, we have options. Bivar leads the way in product innovation with its industry-leading family of rigid and flexible light pipe solutions originally developed to move light in different ways. Rigid light pipes are best … [Read more...]
Bringing LEDs to Life in Design for Data Communication
Introduction In this article, we will look at common challenges with new designs and redesigns. There are common challenges with new designs that every design engineer encounters. No matter what application the design engineer is working on, it requires careful consideration of various factors such as the type of LED being used, and the environment in which the LED will be … [Read more...]
- « Previous Page
- 1
- …
- 3
- 4
- 5
- 6
- 7
- …
- 34
- Next Page »
