Advances in microfabrication processes have led to a continuous miniaturization of Field Effect Transistors (FET) that contain semiconductor (e.g., silicon), insulator (e.g., silicon dioxide), and metallic (e.g., copper interconnects) layers only a few nanometers thick. Ever increasing demand for faster microprocessors and the continuous trend to pack more transistors on a … [Read more...]
Effect Of Improved Thermoelectric Zts On Electronic Module Coolability
In recent years there has been a growing interest in the application of thermoelectrics to electronics cooling. Attention has been focused on thermoelectric cooling both as a possible means to enhance module cooling and to address the chip hot spot problem. Effort has been directed towards the development of new bulk materials and thin film micro-coolers. The usefulness of … [Read more...]
Cooling Options And Challenges Of High Power Semiconductor Modules
Introduction Trends in power electronics systems and devices over the last decade have placed increasing demands on the efficiencies of the thermal management systems used for power Metal Oxide Semiconductor Field-Effect Transistor (MOSFET) and Insulated Gate Bipolar Transistor (IGBT) modules. The pressure to decrease the size of power electronics systems and, subsequently, the … [Read more...]
Toward A Thermal Figure Of Merit For Multi-Chip Packages
Toward A Thermal Figure Of Merit For Multi-Chip Packages Bruce M. Guenin, Ph.D., Associate Editor Introduction Last issue's Calculation Corner dealt with methods for predicting the temperature of each chip in a Multi-Chip Package (MCP) at an arbitrary combination of chip power levels using the principle of superposition [1]. One of the main points of that article was that both … [Read more...]
Thermal Challenges In LED Cooling
Introduction During the last ten years, developments in LED semiconductors have led to an important change in LED applications from that of luminous indicator to that of illuminator. With LEDs now advancing into several lighting fields, LEDs have become one of the standard methods of producing light, joining more traditional sources such as incandescent, fluorescent and … [Read more...]
- « Previous Page
- 1
- …
- 126
- 127
- 128
- 129
- 130
- …
- 178
- Next Page »
