Compact thermal modeling in electronics design Sarang Shidore Flomerics Inc Introduction The challenge of accurately predicting junction temperatures of IC components in system-level CFD simulations has engaged the engineering community for a number of years. The primary challenge has been that near-exact physical models of such components (known as detailed thermal models, or … [Read more...]
About viscosity
Table 1. Dynamic Viscosity Values for Various Gases and Liquids When we look at a fluid parcel subject to a velocity gradient in the direction perpendicular to the direction of the flow, we observe that this fluid parcel deforms. This type of deformation is called shear. The ability to withstand shear is a material property called the dynamic viscosity m. The viscosity … [Read more...]
Synthetic jets for forced air cooling of electronics
Introduction As increasing functionality is packaged into ever-shrinking electronics, cooling requirements rise exponentially. While there have been continued advances in high heat flux technologies [1], commercial, consumer-oriented systems continue to focus on aircooling for reasons of reliability, acoustics, cost and portability [2]. In order to support the increasing power … [Read more...]
In the data center, power and cooling costs more than the it equipment it supports
Historically, the cost of energy and the cost of the data center power and cooling infrastructure have not been on the radar for most Chief Financial Officers (CFO) and Chief Information Officers (CIO) and have not been considered in TCO (Total Cost of Ownership) models. As a result, almost all of the focus has been on driving down the cost of IT equipment in the data center. … [Read more...]
Adhesion of Thermal Interface Materials for CPU Heatsinks, an Overlooked Issue
High performance thermal interface materials (TIMs) inserted between the CPU lid and heatsink - generally referred to as the "TIM2" - provide a reworkable low resistance thermal path in the package stack-up. It is well-recognized that users need to monitor the thermal performance of the TIMs to verify vendor data [1, 2]. Less well-known is that the TIM2 can also mechanically … [Read more...]
- « Previous Page
- 1
- …
- 128
- 129
- 130
- 131
- 132
- …
- 182
- Next Page »
