Introduction As electronic products become more sophisticated and design margins tighten, defining the thermal management strategy early in the design cycle is vital to ensure a cost-effective design for the level of heat dissipation. Optimizing the cooling system for an electronic product can involve juggling many design parameters, such as airflow rate, fan and vent … [Read more...]
ASHRAE Committee Formed to Establish Thermal Guidelines for Datacom Facilities
Introduction The environment of every data center is complex and unique. Air currents within the data center have hot and cold air streams colliding, cold air exhausting upward from perforated tiles, hot air streams exhausting from tops and the rear of servers and storage racks. Not only are these air circulation patterns extremely complex, they can also be transient in nature … [Read more...]
Estimating Temperatures in an Air-cooled Closed Box Electronics Enclosure
Introduction In the majority of air-cooling applications, openings or vents are provided in the enclosure or box in which the electronic components are housed. The required cooling air is drawn in from outside the box by fans or blowers. In some applications, however, there may be airborne particulates or other substances in the air that would be injurious to the electrical … [Read more...]
Communication Network Power Efficiency Assessment, Limitations and Directions
Introduction Despite the slowdown in the communication industry, Internet traffic continues to grow rapidly, fueled by the explosion in data communications, mobile Internet, e-commerce, content rich applications, and multi-media services. Internet traffic has increased by approximately 80% yearly in each of the last three years, and will continue to grow at 60 - 80% annually … [Read more...]
Opto-electronic Transceiver Modules, a System Design Perspective
Introduction Small Form Factor (SFF) optical transceiver packages for use at 1-2 Gbits/s data rates have been described by several authors [1-5]. These rely on dual miniature optical connectors such as the MT-RJ or the LC to provide optical-component case widths as small as one centimeter. Passive alignment of the optical fibers with the active optical devices is achieved with … [Read more...]
- « Previous Page
- 1
- …
- 38
- 39
- 40
- 41
- 42
- …
- 44
- Next Page »
