Heat transfer in electronic packages is a complex problem involving a network of resistive paths for the various laminated structures, bonding adhesives, lead frames, and attachment mechanisms, such as ball grid arrays. However, despite the multitude of materials and interfaces within an electronic package, the largest thermal resistance, and consequently the controlling … [Read more...]
The increasing importance of thermal test dies
Thermal test dies are among the major tools used in package thermal design qualification. They are usually simple chips, containing heaters and temperature sensors. The sensors measure the temperature on the chip surface as a result of the steady state powering or the time dependence of the temperature increase or decrease in case of transient qualification. From these data, … [Read more...]
The thermal conductivity of fluids
About 10-15 years ago, fluids, either directly (mainly Fluorocarbons), or indirectly (cold plates flushed with water) cooled the majority of mainframe computers. Nowadays, the expected increase in heat flux density causes a renewed interest in either passive or active liquid cooling, because the limits of air cooling come within reach. Other practical applications in which … [Read more...]
Temperature of in-line array of electronic components simulated by rectangular blocks
An earlier work by the authors (Molki et al., 1995) discussed the adiabatic heat transfer coefficient of rectangular blocks situated in an in-line array. In real circuit boards, heat is generated by a number of electronic components. The temperature of each component is affected by two factors, self-heating and thermal wake effect. Self-heating is the temperature rise due to … [Read more...]
Thermal challenges in the telecom and networks industry
Figure 1: Telecom Equipment Operating EnvironmentsThere are two main reasons for doing thermal design in the telecommunication industry. The first is to ensure functionality of the equipment and system when subjected to extreme environments. The second is to ensure high dependability of the network. While doing thermal design, many challenges must be kept in mind: the … [Read more...]
- « Previous Page
- 1
- …
- 336
- 337
- 338
- 339
- 340
- …
- 356
- Next Page »
