About 10-15 years ago, fluids, either directly (mainly Fluorocarbons), or indirectly (cold plates flushed with water) cooled the majority of mainframe computers. Nowadays, the expected increase in heat flux density causes a renewed interest in either passive or active liquid cooling, because the limits of air cooling come within reach. Other practical applications in which … [Read more...]
Low Noise Axial Fan Applications
There are three basics to creating low-noise axial fan applications: airflow path design initial fan design analysis and correction of specific acoustical responses in the physical model Each is important and contributes to the overall sound levels of the program. Figure 1. Representative flow-versus-pressure characteristic of system air path.A flow-versus-pressure … [Read more...]
Temperature of in-line array of electronic components simulated by rectangular blocks
An earlier work by the authors (Molki et al., 1995) discussed the adiabatic heat transfer coefficient of rectangular blocks situated in an in-line array. In real circuit boards, heat is generated by a number of electronic components. The temperature of each component is affected by two factors, self-heating and thermal wake effect. Self-heating is the temperature rise due to … [Read more...]
Thermal challenges in the telecom and networks industry
Figure 1: Telecom Equipment Operating EnvironmentsThere are two main reasons for doing thermal design in the telecommunication industry. The first is to ensure functionality of the equipment and system when subjected to extreme environments. The second is to ensure high dependability of the network. While doing thermal design, many challenges must be kept in mind: the … [Read more...]
A system level cooling solution for cellular phone applications
Improving thermal performance of electronic components is very challenging due to the increasing power density and decreasing module sizes. The design trade off between electrical and mechanical characteristics and the cost of manufacturing MCM products requires innovative solutions to improve device thermal performance. The primary cooling path in portable electronics serves … [Read more...]
- « Previous Page
- 1
- …
- 60
- 61
- 62
- 63
- 64
- …
- 77
- Next Page »
