Examples of state-of-the-art thermal management solutions at the dawn of the 21st century (left to right): a TCM module, a high-density heat sink, and an ultra performance, low profile fan-sink. Thermal management has served as a key enabling technology in the development of advanced microelectronic systems and has facilitated many of the "Moore's Law" [Moore, G.E., 1975] … [Read more...]
Adjusting temperatures for high altitude
Many companies design products with electronics that must function reliably at high altitude, typically 1,500m (5,000 ft) or 3,000m (10,000 ft) above sea level. Estimating the increase in operating temperatures is necessary to design and qualify such products. There are a variety of corrections used to account for this effect, many of which sacrifice accuracy for simplicity. … [Read more...]
Determining the junction temperature in a plastic semiconductor package, part II
In the majority of applications involving plastic surface-mount packages, most of the heat generated by integrated circuits will flow to the printed circuit board (PCB) by way of the package leads and then to In higher-power applications it is often necessary to attach a heat sink to the top of the package to keep the junction temperature of the chip within specified limits. … [Read more...]
Acoustic noise emission and communication systems in the next century
Acoustic noise emission is one of several physical design issues addressed during the design of telecommunications and information technology equipment. In most systems, noise is a by-product of the air-movers used for system cooling. The amount of heat dissipated in electronic systems cooled by forced convection is directly proportional to volumetric flow rate. The flow rate, … [Read more...]
Cooling Electronics at High Altitudes Made Easy
Introduction High altitude air cooling has always been somewhat of a mystery to the uninformed. The first reaction to the situation is that there is just not enough air at altitudes greater than six kilometers (20,000 ft). At times this may be true, but many things can be done to improve the cooling and obtain an acceptable design. The most important thing to remember when … [Read more...]
- « Previous Page
- 1
- …
- 4
- 5
- 6
- 7
- 8
- Next Page »
