The naphthalene sublimation technique has been demonstrated by a number of investigators to be an excellent method for obtaining heat transfer results [1,2] and a few have applied this technique to applications focused on electronic cooling [3-6]. These investigators have found that the mass transfer process can be set up with cleaner boundary conditions and can be studied more … [Read more...]
Simplified Formula for Estimating Natural Convection Heat Transfer Coefficient on a Flat Plate
Although most of the emphasis today in the electronics cooling community is devoted to extending forced convection cooling capability, many applications still depend upon natural convection cooling. Basically, natural convection cooling combined with radiation is what results when a fan is not used in the cooling design to move air. Instead, movement of the air is induced by … [Read more...]
Don't underestimate radiation in electronic cooling
don't underestimate radiation in electronics cooling Bruce M. Guenin, Ph.D., Associate Editor, Amkor Technology, Inc. It is easy to underestimate the role of thermal radiation as a significant contributor to electronics cooling in environments without forced air flow. By its very nature it is invisible. The proper treatment of it can be intimidating due to the complicated … [Read more...]
Temperature of in-line array of electronic components simulated by rectangular blocks
An earlier work by the authors (Molki et al., 1995) discussed the adiabatic heat transfer coefficient of rectangular blocks situated in an in-line array. In real circuit boards, heat is generated by a number of electronic components. The temperature of each component is affected by two factors, self-heating and thermal wake effect. Self-heating is the temperature rise due to … [Read more...]
Evaluation of different heat transfer coefficient definitions
The analysis of convective heat transfer problems pivots on the accurate knowledge of the heat transfer coefficient, h. The heat transfer coefficient is affected by many parameters which have been defined differently by various investigators. for natural convection cases, the temperature distribution is the governing parameter, while for forced convection problems, the fluid … [Read more...]
