Thermoelectric temperature control systems are being used in an increasingnumber of applications. Typical applications of these systems are in thermalregulation of electronic enclosures, recirculating chillers for laser cooling,semiconductor process control and management of patient hypo- and hyperthermia. Thermoelectric coolers (TECs) are essentially solid state devices that … [Read more...]
DELPHI – A status report on the European -union funded project for the creation and validation of thermal models on electronic parts
The accurate prediction of the operating temperatures of critical electronicparts at the component-, board- and system-level is seriously hampered by thelack of reliable, standardised input data. The DELPHI project is addressing thisproblem by the development and experimental validation of thermal models of avariety of `generic' electronic parts. DELPHI (which stands for … [Read more...]
A valve-less fluid pump for electronic cooling
In a research project at the Royal Institute of Technology we have developeda pump based on a new fluid pump principle with no valves. The pump consists oftwo fluid flow rectifying diffuser/nozzle elements which are connected to theinlet and outlet of a pump chamber with an oscillating pump diaphragm, as shownin Fig.1. The diffuser/nozzle element has a lower flow resistance in … [Read more...]
Thermal conductivity of printed wiring boards
The thermal management of printed circuit boards is of increasing importanceas the power density of components and circuits continues to rise. Thesituation is complicated by the use of boards with multiple sheets of copperembedded in the electrically insulating boards to provide electromagneticshielding and to allow more three-dimensional connectivity of the circuitry bythe use … [Read more...]
Radial nozzles
In a quest to increase surface heat removal rates for electronics packaging, impinging jet cooling promises to be effective and inexpensive. Most impingement cooling systems use open pipes. These are effective but have drawbacks such as high impingement forces on the target surface. In the last 10 years radical nozzles have been shown in the laboratory to benovel and … [Read more...]
- « Previous Page
- 1
- …
- 10
- 11
- 12
