Introduction Due to the increasing power density in today's industry standard servers, thermal design and cooling is a significant challenge. In a typical server, the two most challenging elements to cool are the processors and the memory modules. The system level fan speeds are directly dictated (in most cases) by both processor and memory temperatures. Due to the fact that … [Read more...]
Simplified Correlations For Radiation Heat Transfer Rate In Plate-Fin Heat Sinks
Radiation heat transfer can be a significant portion of total heat transfer from a heat sink, particularly in natural convection flows. The enclosures for most natural-convection-cooled indoor and outdoor electronic equipments, such as pole or wall-mount base stations and radio units, include external fins to improve natural convection and radiation heat transfer rates. Early … [Read more...]
2U Rack Mountable Vapor Compression Cooling System For High Power Electronics
Vapor compression refrigeration has long been used to cool telecommunications equipment and some high performance computers. On the whole, however, its usage has been confined to high-value, relatively large, and stationary applications. The advantages of vapor compression cooling (VCC) systems are fairly well known. They can provide heat sinks at below ambient temperatures … [Read more...]
Thermo-Reflectance Thermography For Submicron Temperature Measurements
The primary approach to maintaining the aggressive progress in the microelectronics industry has been to increase the density of elementary transistors and to reduce the size of their active areas. As a result, the removal of heat generated by various internal system components has become a major design challenge, further complicated by the lack of knowledge of the temperature … [Read more...]
Electronics Cooling At Higher Pressures … a Positive Displacement Pump Solution
Introduction Many liquid cooling solutions in use today employ cooling system devices that result in system pressure drops limited to <0.5 bar (7.25 psi), which allows these systems to fit within the limits of centrifugal pumps. The evolution of alternative cooling devices has brought about pressure drop requirements >1.0 bar (14.50 psi) in some cases [1]. These higher … [Read more...]
- « Previous Page
- 1
- 2
- 3
- 4
- 5
- 6
- …
- 12
- Next Page »
