Introduction Thermal management of electronic components must solve problems connected with the limitations on the maximum chip temperature and with the requirements on the level of temperature uniformity. To cool electronic components, one can use air and liquid coolers as well as coolers constructed on the principle of the phase change heat transfer in closed space; i.e., … [Read more...]
Heat pipe fundamentals
The use of heat pipes in thermal management is increasing rapidly as power densities in electronics continue to rise. Heat pipes are attractive because they can typically carry 100 or more times as much heat as an equivalent piece of solid copper. The basic principle of heat pipe operation is very simple. A small amount of working fluid, typically water, is sealed inside a … [Read more...]
Heat Pipes for Electronics Cooling Applications
Figure 1: Heat pipe operation Introduction All electronic components, from microprocessors to high end powerconverters, generate heat and rejection of this heat is necessary for theiroptimum and reliable operation. As electronic design allows higher throughputin smaller packages, dissipating the heat load becomes a critical design factor. Many of today's electronic devices … [Read more...]
